Air/fuel mixture analyzer

  Accessories

Home

       

     This new air/fuel tool incorporates into the newest version

      of the Dayton Dyno software package. Now you can record

         air/fuel ratio for every 250 rpm of your dyno testing.

This kit uses a wide band sensor and exhaust clamp to record readings   from 9 to 19:1 ratios. Eliminate the guesswork, know what your engine is doing on every test. Simply attach to motorcycle battery, or use auxiliary battery to heat the O2 sensor. Plugs directly into Data Processor Box for easy installation. Some V twins or single cylinder bikes may require the

  AF-002 exhaust probe to record A/F mixture at part throttle settings.

Part# AF-001   Air/fuel tool with standard exhaust clamp                             $795.00

      AF-002   Low flow exhaust probe for V-twins and singles.                       $349.00

                 (Requires 25-35 psi regulated shop air)

Note: AF-001 Air fuel exhaust clamp is designed for aftermarket exhaust systems only.                                                                              O2 Sensor carries a 30 day warranty.

Superflow probe# 1200A-EXH01    1-800-471-7701         O2 sensor VW#021-906-262-B   1-253-833-4940

AF-001 Standard exhaust probe                                          AF-002 Low exhaust flow probe